FractalDesign's Kelvin S36 simple water cooling system with a large 360mm radiator is now available!

The Kelvin S36 (model number: FD-WCU-KELVIN-S36-BK), a simple water-cooling kit for CPUs with a 360mm radiator that can be fitted with three 120mm fans, is now available from Fractal Design.

The Kelvin S36 is an all-in-one water cooling system consisting of a ceramic pump developed in collaboration with Alphacool, a copper radiator and copper base, and water cooling tubes reinforced with anti-breakage coils.

While the standard type is filled with cooling liquid, it is equipped with a water inlet on the side of the water block for replenishing the cooling liquid. The G1/4-inch fitting, which is common in water cooling, can be used to add a radiator or GPU water block later on.

The pump speed is 2400 rpm, the maximum flow rate is 72 L/h, and the noise bell is 25 dbA. The fan is a PWM-compatible model with a speed of 800 to 1700 rpm, a maximum airflow of 62.4 CFM, and a noise level of 26.9 dbA.

The radiator measures 397 x 124 x 30 mm, and the water block measures 69 x 69 x 40 mm.

Supported CPU sockets are LGA2011/1366/1156/1155/1150/775 for Inetl and Socket FM2+/FM2/FM1/AM3+/AM3/AM2+/AM2 for AMD.

Incidentally, this is the third model of simple water cooling with a 360mm radiator, following Swiftech's H320 and Thermaltake's Water 3.0 Ultimate.

Prices are as follows

Kelvin S36
23,800 yen (excluding tax): Tsukumo eX.
24,800 yen (excluding tax): Oriospec