Two models of aluminum heat sinks for M.2 SSDs are available from Nagao Seisakusho!

Two aluminum heat sink models for M.2 SSDs are now available from Nagao Seisakusho.

The lineup consists of two models: the "SS-M2S-HS01" tape-fixed type with a 1.5mm-thick heat sink and the "SS-M2S-HS02" side frame structure type with a 2mm-thick heat sink.

The SS-M2S-HS01 and SS-M2S-HS02 are dedicated heat sinks for M.2 SSDs.

The combination of the aluminum heat sink and the "ultra-low hardness heat dissipation silicon pad" that combines high thermal conductivity efficiency of 5.2W/m-K and insulation properties effectively suppresses thermal runaway.

The main specifications of the "SS-M2S-HS01" are as follows: the main unit measures 23 (W) x 75 (D) x 6 (H) mm and weighs approximately 20 g. The heatsink is made of 1.5 mm thick aluminum with black anodizing.

The SS-M2S-HS02 measures 23.5 (W) x 75 (D) x 4.5 (H) mm and weighs approximately 20 g. The heatsink is made of 2 mm-thick white anodized aluminum. The main unit has a 3-part side-frame structure, and can be used without the side frames.

Prices are as follows

Nagao Seisakusho "SS-M2S-HS01"
1 ,480 yen (tax included): Dospara Parts Kan