RIOBOT Transformable Combined R-GUN Powered" in-depth review Part 2! The size is truly out of the ordinary BIG! The combined attack with SRX is also fully reproduced!

In this popular series, voice actor Yasuyuki, who loves robots more than any other voice actor in the industry, plays around with the latest toy toys and hobbies!

Continuing from the previous installment, we will be introducing the "RIOBOT Transformable Combined R-GUN Powered," which is available only at the SEN-TI-NERI official online store.

Following the introduction of the R-GUN in its R-GUN state, this time we will be showing the R-GUN Powered in its transformable "Metal Genocider Mode. And we would like to challenge the collaboration with SRX, which we have been waiting for!

Click here for the first part of Taiyuki's Toy Diaries Vol. 26 "RIOBOT Transformable Combination R-GUN Powered

Taiyuki's Diary of Toys and Games Part 27: RIOBOT Transformable Combined R-GUN Powered Part 2

Metal Genocider Mode...Activate!

The wrists are put back on the smaller ones for deformation.

Remove the head, arms, ankles, backpack, red parts at the waist, and white parts at the ankles.

Lift the chest, retract the cockpit block, and tuck the waist armor upward.

Tilt the chest forward, rotate the legs 90° from the base and put back the waist armor.

Attach the red parts to the underside of the waist and rotate each leg 90° outward on the roll axis.

The ankles are transformed as shown in the lower part of the photo.

Attach the two attachment parts ......

Attach the ankle parts.

Both arms are also deformed and connected to the attachment parts.

The backpack is further disassembled and the grips are deployed and ready.

Tilt the front of the R-GUN main body upward, then attach the arm parts to the underside and the grips to the rear,

After attaching the backpack, the metal genocider mode is complete!

Dead end shoot!"

R-GUN alone can also release attacks in this state!

Looking at it from the side, it is easy to see how the parts are arranged in personal trooper mode.

This time, by making the transformation by replacing the parts, we have succeeded in maintaining a solid shape, deforming it without strain, and eliminating breakdowns in each form.

Now let's take a look at another personal trooper form, the R-GUN Powered.

Nowadays, this form is already familiar. The High Twin Launcher is attached via the backpack and the Beam Cattar Sword. The High Twin Launcher is very long, so the photo is also long and narrow.

The impression from the rear of the vehicle will be completely different since such a large item is additionally equipped.

Even with the additional parts, it is a very cohesive unit.

Not only the movable parts of the backpack, but also the connection parts of the High Twin Launcher and Beam Cattar Sword can be rotated.

High Twin Launcher, Maximum Shoot!

Twin Magna Rifles, Double Shoot!

It is also fun to recreate poses from the game in realistic body shape!

We have assembled them with the SRX team members that have been released so far.

After more than 20 years of "crossing the time" ......, the day has finally, finally come when the three-dimensional objects of the SRX team are all together, ma'am!　Please forgive her even if her husband is buying it!

I am "lucky" that I don't even have a wife to forgive me! (Tears)

So, if you have these 4 machines, ...... is the place to be!　Thank you for your patience!

Let's take a look at the Hyper Tronium Buster Cannon, or the Tenjo Tenge Ichigekishin Gun (or is that the other way around?)!

From the Metal Genocider mode of the R-GUN, some attachment parts are replaced to prepare it to accept the High Twin Launcher parts.

The High Twin Launcher has a slightly different transformation process for the left and right sides, but basically the transformation is symmetrical and the same. Since the deformation is a bit detailed, we will skip this part.

Here is the High Twin Launcher transformed and docked.

Connect it to the metal genocider mode (R-GUN)!

This completes the Metal Genocider Mode of the R-GUN Powered!

Its length, we will measure it later, but you will be surprised~!

A special stand part for displaying the figure in this form is also included.

It looks great as it is. If you want, you can even display it as it is.

The muzzle is so long that it is out of focus when viewed from behind.

It boasts a total length that is nearly three times the length of the base. It is both cool and too big. I can't help laughing at how cool and how huge it is.

The muzzle has an original part and can be attached as you can see.

This is really your choice. Both are possible~~!

In addition!　There is also a pedestal like this.

You already know why it is such a high pedestal from the ground, don't you?

Now let's have Mr. SRX appear here!

Since it is huge and heavy, we will pose it in advance using the stand to prevent damage.

If you grab the grip of the R-GUN onto SRX's wrist, you will be able to ......

The Tenjo-tenka Ichigeki Gun is ready to fire!

It is so huge that it is no longer big enough to fit on the background paper!　It is a little unsightly, but please forgive me for this one time!

The stand I mentioned earlier was height-adjusted in order to have SRX hold it like this. Because of its height and high center of gravity, it may tip over if you try to move it and SRX together when changing the direction. So, move each of them separately and carefully to enjoy the powerful scene.

From here on, we will show you the power of the SRX in this state from various angles.

First of all, please take a look at this short video I created!

How was it?　Did you get a sense of the enormity?

Let's take a look at the enormity in numbers,

The HTB Cannon is approximately 40 cm long!

Even the ruler that used to stick out of my school bag in elementary school was 30cm long, but this is 10cm longer than that!

Viewed from the top. I feel numb when I look at it.

In order to take pictures of this situation, the depth of the usual photo stand was not enough at all, so I hastily extended the stand by stacking cardboard boxes.

From a different angle. It's a bit of a problem because it looks so cool from all angles.

It is very powerful even when viewed from the side!　I usually shoot within the width of this black sheet, right?　You can see that this toy is ridiculously big!

If you look at the HTB cannon from the SRX side and focus on the cannon, the SRX will blur. That's how far away the HTB cannon is.

Thanks to the expression on SRX's shoulder, doesn't it look like he is preparing for the recoil with a lot of force?

And when you attach the original parts at the muzzle, you get this look.

Hmmm~~, once again, both are available, and it is hard to decide which one to display.

Ryusei "Let's go, captain!"

Villetta: "Yeah."

In the actual game, it is often a combined attack of SRX and R-GUN Powered, so it is often lined up like this before the HTB Cannon is fired.

The SRX is huge, but the length of the high twin launcher is so great that it almost approaches its height.

The three-dimensional model can be played with freely by those who have it, whether it is to recreate various situations, or to recreate the original situation. If you have not played with it yet, you should definitely open the box and play with it!

So, how did you like our attempt to introduce the product with a short video this time?

It has been a long and short ...... since the launch of R-1. First of all, thank you very much, Senkei Neri, for completing the race!

Since the first appearance of SRX in the game in 1996 and R-GUN in 1998, the items that enabled the transformation and combination that many Super Robo fans have dreamed of are now available in 2022.

In 1996...... I hadn't even started working as a voice actor, and I didn't expect to be one of the main characters of the "Super Robo" series, Quavray Gordon and Keiji Tachibana, after that. I never thought that I would be involved in various other roles.

Furthermore, I am now introducing three-dimensional "Sparobo" objects like this at ....... It is truly a dream come true.

The RIOBOT Transformable Combined R-GUN Powered is a limited item available only at the SEN-TI-NERI official online store and is no longer available.

For various reasons, there may be some people who had no choice but to forgo purchasing this item. I took these photos in the hope that I could share the excitement with such people, even if only a little.

I am not sure what will happen in the future, but if by some chance we decide to re-release the product, I hope that you will be able to feel this emotion directly with your own hands.

I would have liked to close with something nice like this, but I could not. ...... But still, it's not so easy to gather factors. ............ (laugh)