Voice actor Yasuyuki Tai delves into the "THE Combined Might Kaiser" in Part 1! The transformations and actions of the figure are perfectly reproduced, keeping the image of the anime!

Yasuyuki's Toys and Games #46 THE Combination: Yusha Tokkyu Mightgine Might Kaiser (Part 1)

Good Smile Company's Mecha Smile brand "THE Combined Series" has released Might Kaiser, following Might Ga-in!

⇒Please check out this article as well!
THE Gattai Mightgein] This is the definitive version! Yuuki Tai & Hiro Tanaka (Good Smile Company) have conducted an extensive examination of the ultimate combined toy from Meca Smile!

Might Kaiser is the so-called No. 2 robot that appears in the TV anime "Yusha Tokkyu Might Ga-in". It is the type of robot used by the hero, Kaze Toki Maito, in the Yuusha Express Squad.

It appears in the latter half of the story and is used as a Kaiser part to combine with Might Ga-in, and of course, the gimmick is well reproduced in this item as well.

Let's take a look at the package first.

THE Combined Yusha Express Might Ga-in Might Kaiser

View onRakuten Ichiba View on Amazon.co.jp

Might Kaiser also transforms into Kaiser Jet, so that figure is also included. The Great Might Gain's face in the lower left corner will definitely raise your expectations.

On the back are several composite photos inspired by the play.

First, here are the contents of the figure.

The parts have been assembled to cover all of Might Kaiser's gimmicks. Since each part of Might Kaiser is separated into each Kaiser Machine and Drill Express, we will start with each machine first.

Kaiser 1 is a small reconnaissance machine. It incorporates the head of the Might Kaiser, and in the Might Kaiser form, it further comprises part of the chest and waist, and in the Great Might Guine, the waist front armor. Three jet nozzles can be seen at the rear of the fuselage.

Kaiser 2, as you can see, is an underground tank. It is responsible for the entire right arm of the Might Kaiser. In the Great Might Gein, it merges with the left arm. It is interesting that the drill shape is not conical but square pyramid.

Kaiser 3 is a powerful crane truck. It is responsible for the entire right arm of Might Kaiser. In Great Might Guine, it merges with the left arm.

The crane can swivel and extend and retract.

Kaiser 4 is an undersea vehicle. It is responsible for the right leg of Might Kaiser. In Great Might Gain, it merges with the left leg.

Left and right arms are non-movable.

Kaiser 5 is a super bulldozer. It is in charge of the left leg of Might Kaiser. In the Great Might Gain, it combines with the right leg.

The bucket part can be lifted with the benefit of deformation.

Kaiser drill. Originally the lead car of a drill express towing a Kaiser Carrier. The Kaiser Carrier is a separate item due to its huge size. The drill also shows details of the Vulcan cannon.

This mecha is responsible for the Might Kaiser's body, waist, and thighs. At the rear of the vehicle, there are joint parts used for each assembly, and presumably, the connection with the Kaiser Carrier is also made here.

The wheels are uniquely positioned and run across multiple tracks.

Let's start by looking at the merging into the Kaiser Jet.

Kaiser 1 is ready to merge with its nose extended.

Tilt the left side panel of Kaiser 2 and the right side panel of Kaiser 3 at 45°.

Kaiser 4 and Kaiser 5 are ready to be combined by lifting the front part upward.

Store the arms inside the engine block respectively.

Embed the Great Might Gein's headdress inside the Might Kaiser's chestpiece. Originally, these parts were supposed to be identical, but this time we prepared large and small parts to prevent the proportions from being broken in each form.

Deploy the combining joints on the sides of the Drill Express, and combine the chest parts of Kaiser 1 and Might Kaiser on the top surface.

Combine Kaiser 2 and Kaiser 3 with the joints on the side of the deployed Drill Express.

Kaiser 4 and Kaiser 5 are joined to the rear of the Drill Express.

Furthermore, the engine block is joined to each side of Kaiser 4 and Kaiser 5.

Since the shape of the joints are reversed on the left and right sides, Kaiser 4 and Kaiser 5 cannot be swapped and combined into the Kaiser Jet.

Completed!　Kaiser Jet! It is big!　It is flashy!　The drill of the model is powerful! Aerodynamics?　It's okay!　It looks like a jet plane from any angle, and it's very convincing!　Mostly this story is two dimensional ...... oops spoiler spoiler.

With simple transformation and merging, it successfully merged into the jet aircraft form. Here is one of my favorite Yusha mecha.

THE Gattai Yusha Tokkyu Might Ga-in Might Kaiser

View at Rakuten Ichiba View at Amazon.co.jp

This is how big it is when you hold it in your hand. The original was quite large, but this one is close to that size. The Kaiser 4 and Kaiser 5 at the rear of the fuselage have the same shape as the robot's legs, but when you see them combined like this, it doesn't bother you at all.

From the front.

The panels of Kaiser 2 and Kaiser 3 are raised to look like canard wings. This part can be combined with the panel folded as before, but it is interesting to see the arrangement of this part. Perhaps the idea came from playing with the product at the time and was incorporated into this product?

There are four jet engines in the rear. In this world, oil is depleted, so the flying mecha of the heroic express squadron can fly with the "superconducting jet engine," a dream technology.

They are all together with Might Gein and others. In terms of area alone, the Kaiser jet is the largest.

Then, transform it into Might Kaiser. First, let's ask Maito to change from Might Wing to Drill Express.

Change Might Kaiser!

Remove the drill from the tip of the Drill Express.

After the drill is removed, the leading part is divided into right and left parts. It is made to go around to the side of the car body.

This completes the transformation of the drill express.

Extend the nose of Kaiser 1 slightly and deploy the head that was stored in the fuselage.

Kaiser 2 removes the drill and deploys the left and right panels.

Attach the drill to the roof, stow the front part in the body, turn the arm joints to the outside, and deploy the joints on the bottom of the body as well. Close the body of the vehicle and also close the left and right panels.

Kaiser 3 is almost the same as Kaiser 2. The only difference is that the crane is not replaced.

Kaiser 4 and Kaiser 5 are in the same condition as Kaiser Jet.

The arms are removed from the engine block.

Slide Kaiser 4 into the right leg and Kaiser 5 into the left leg to combine.

Attach the right arm to Kaiser 2 and combine it with the drill express. Kaiser 3 is likewise combined to the left side.

Kaiser 1 merges from the head to the drill express. ......

The nose is tipped down and merged into the body.

Attach the emblem parts to the chest.

Dock the engine block on both sides and merge it to the back of the Might Kaiser to complete!

Joe "Hmmm ....... So a new robot is on the way."

Maito: "Yes, that's right!"

On the wings of love......"

'With all my courage!

Turn the wheel of justice!

Mighty Kaiser, the hero's express!

As you'd expect, it's here now!

We have tried various poses using various interchangeable and movable wrists, but what do you think? Even if we were not able to reproduce the anime's performance perfectly, we hope that we were able to convey the atmosphere of the anime well enough.

And the proportions of the figure standing still!　It's wonderful, isn't it?

THE Combined Yusha Express Might Ga-in Might Kaiser

View atRakuten Ichiba View at Amazon.co.jp

Tai Yuuki

Born two days before the broadcast of "Invincible Superhero Zambot 3. He has loved toys (especially robots) since his childhood, and began building plastic models in elementary school. After becoming a voice actor, his love of robot toys and plastic models has not changed, and he debuted as a writer at Akiba Research Institute.